10" Stack x 4" Thick, Hand-Peeled, Kiln-Dried White Pine Half Log Siding

Description

Here is the most beautiful, natural half-log siding you will find anywhere at or below wholesale prices!
The Logs
10" stack x 4" thick, hand-peeled, kiln dried, half log white pine siding - Made to order at .63 per linear foot
10" stack x 4" thick double-peeled, air dried, half log white pine siding - Made to order at .99 per linear foot
Full-log double-round tails ready for on-site Saddle notched for each. (see corners below)
4" x 5" kiln dried window and door trim with hand-peeled face side available at .85 per linear foot
Occasionally some pieces may have the sought after, slight blue or brown stain in the wood which is a sap stain that occurs naturally. On occasion there may be some small cracks or other natural blemishes, but these are natural characteristics of wood which adds character.
The Corners - Several Options Available
Custom matching tails for remodel jobs and additions:
Natural Tail - each
Regular Double Round (flat on top and bottom) - each
Saddle Notched Tail - No longer available - all notching must be done on site
9 -10" Diameter Vertical Log Outside Corners .44/lf - 8' Length are .52 each and 10' Length are 4.40 each
The Uses
This is a great product for either a new home construction or for an existing home remodel project.
Use it on the exterior of your home, garage, cabin, barn, shed, etc. or use it on your interior walls for your home, cabin, basement, etc.  Everyone knows the great insulation value that wood can give.   Because of its density it not only keeps your home warm, but it also has great sound-proofing abilities.
How to Figure How Much You Will Need
It takes 1.2 linear feet to cover 1 square foot and the calculation is simple:  If 100 square foot is needed, multiply 100 by 1.2, this will equal 120 - the amount of linear feet needed.  To determine square footage:  Multiply the perimeter measurement by the wall height.
Remember to add some for waste, which will vary from job to job.  Normally figuring 10% for walls and 15% for gables is recommended.  If there are a few windows and doors in the wall, usually you can figure the wall square footage and ignore the windows and doors and this will give you the extra you will need.  Subtract off any large areas such as garage doors and picture windows by figuring out the square foot of each and subtracting this off the total square footage.  For gable ends square footage can be figured easily by multiplying the width at the bottom by the height from the eve or top of the wall up to the peak and divide by 2.  Don't forget to add at least 15% for waste because of the angles.  If there are two gables, skip dividing by 2 and you have both ends.  If you have any questions, please email and I can help figure this out.
The Shipping!
The siding can be delivered to your job site.  Please allow up to 12 weeks lead time to custom cut your order. Please call 715-887-25fifty or email for an estimate.    VERY IMPORTANT:  When requesting a quote, send your zip code, phone number, and amount of product you may need so that a quote can be calculated correctly.
Thank you for looking!