Brass Water Meter Adapter install 5/8" x 3/4" (7.5"long) meter to 1" Setter, A24

Description

A24 Water Meter Size
Adapter
Install 5/8" x 3/4" or 3/4" x 7.5" meter in a 1" Meter setter
Extends 7.5" meter lay length to fit 10.75" setter lay length
To maximize revenue and meter accuracy, you should always use the smallest size meter that will handle the flow rates required of the building tenant. These adapters allow easy downsizing of meters without re-plumbing the meter setting.
For installing a 5/8" x 3/4" or a 3/4" short (7.5" lay length) into a 1" meter setting with 10.75" lay length. Changes thread diameter on size from 3/4" to 1", Extends meter lay length from 7.5" to 10.75"
A. Allows Downsizing an existing 10.75" lay length 1" water meter to a new 5/8" x 3/4" meter extended with this adapter.
Changes a 5/8" x 3/4" meter with 7.5" lay length to 10.75" lay length of a 1" water meter.
B. Allows installing a 3/4" Short body 7.5" long meter  to be installed in a setter space for a standard full size 1" lay length meter setter.
Lead-Free Brass
One end has 1" AWWA Male Meter Threads
One end has 3/4" AWWA Female Meter Threads
Extends 7.5" long meter to 10.75" long
Includes internal composite gasket on female side
TWO Adapters Required per meter, one on each end, sold as a set of two.
To Use:
Remove Old Meter - 1" x 10.75" long"
Install New Meter - 5/8" x 3/4" meter with this adapter installed on BOTH ends.
No change necessary to meter setter or plumbing.
Cross References: Ford Meter Box # A24 or A24-NL, Trumbull 368-0641,
Note: This does NOT fit a 5/8" x 1/2" meter.  This does not upsize a full 3/4" (9" lay length) meter. See other listings for those adapters.