Forklift Brake Master Cylinder for Clark with Push Rod 799791 CL799791

Description

The
forklift Brake Master Cylinder is the first and vital component in a vehicle's braking system, and it activates by depressing the brake pedals. The brake pedal drives a piston toward the forklift brake master cylinder with push rod for Clark 799791.
Brake fluid forces the brake lines to slave the cylinders at each wheel, turning the piston's drive to move friction material against the wheel hubs and eventually stop the reels or wheels.
Replacing the
forklift brake master cylinder
is necessary after a few years, when seals wear off. It's not difficult to repair or replace; however, the details might vary depending on the model and make of your Forklift.
Our
Forklift Brake Master Cylinder with Push Rod for Clark 799791
has the same specifications as the following part numbers:
Baker: BK100829, BK100830, BK9025EJ, BK9025EJ1, BK9025EJ2, BRCK2389936
Clark: 100830, 2389936, 313200, 799791, 884789,
Caterpillar / Mitsubishi: 0971571, 971571
Hyster: 0840539, 0A99492, 1198107, 3011190, 3053637, 3136547, 840539, 99492, A-99492, A99492
Jungheinrich: 1400415, 14004150,
Komatsu: BS500044, D174430
Linde: 100829, 100830, 9025EJ, 9025EJ1, 9025EJ2, LP0605-1094 [LPM]
Toyota: 00591-02143-81, 00591-10997-81, 00591-30235-81, 00591-31360-81, 00591-52183-81, 00591-62115-81
Wagner WGF2796
Yale: 0657976-00, 0657976, 065797600, 129873400, 220028547, 220050678, 500678400, 501081500, 504805768, 657976, 65797600
How to Test Forklift Brake Master Cylinder with Push Rod?
Open your brake fluid reservoir.
Take a look at the lid.
Look inside the master cylinder.
If both chambers of your master cylinder are filled with brake fluid to the proper level, close the master cylinder carefully, without letting any dirt fall into it.
Signs if your Forklift Brake Master Cylinder with Push Rod for Clark 799791 needs replacement or repair:
Sinking Brake Pedals.
Wet Feel on your brake pedals.
Leaks on your brake fluid.
The brake warning light turns on when you step on the brake pedal as it pushes the rod in the brake master cylinder.
How to Disassemble a Forklift Brake Master Cylinder with Push Rod for Clark 799791?
Prepare your vehicle and turn on the emergency brake—layer with an old newspaper under the engine to catch any brake fluids.
Remove the forklift brake master cylinder with a push rod; use a line wrench to loosen the brake lines.
Remove the reservoir from the top of your forklift brake master cylinder and close it off with a screwdriver.
Remove the lock ring with snap ring pliers and retain the ring that keeps the valve from the reservoir in place & remove the valve.
Put back the Forklift Brake Master Cylinder with Push Rod for Clark 799791 in the engine and replace it's bolts in order to hold the vehicle body. Reattach your vehicle brake lines and fill the master cylinder with brake fluids.
Lastly, operate the brakes and have a friend open and close the bleeder valves on your vehicle wheels until there's no more air in the system and brake fluid is clear. Once you're done bleeding the brakes, you need to fill up the reservoir again and check for brake pedals if it works as it should before.
Not sure if our Forklift Brake Master Cylinder with Push Rod for Clark 799791?
You may contact us for compatibility and product recommendations. Our team can quickly source and provide you an assessment to provide the correct product or parts based on your needs.
We also offer a wide selection of Forklift Brake Master Cylinder with Push Rod for other brands.
SAME DAY SHIPPING (CUTOFF TIME 2PM PST / 5PM EST MON - FRI)
30 DAY RETURNS (BRAND NEW CONDITION)
1 YR WARRANTY
RETURN POLICY
Our goal is to make you 100% satisfied in all transactions and parts needs.
If you are not satisfied with our product or you ordered an incorrect part, simply message us and we will issue RMA within 12-24 hours.
Our returns are hassle-free and simple and we do not charge restocking fee.
If we sent defective or incorrect part, we take care of return shipping and provide full refund.
If you ordered incorrect part, then you pay return shipping and get full refund on product.
You need correct replacement? Just let us know and our
parts specialist will help right away!
Parts returned to us need to be uninstalled and in original box.
Same day shipping and tracking available within 12 to 48 hours.
We stock over 5 million material handling parts, just message us and we will get anything you need.