Load Wheel Kit for Crown PTH50 PTH 50 PTH-50 Manual Pallet Jack Lift Truck

Description

The load wheel kits are an easy-to-install and cost-effective solution for your manual pallet jack crown PTH 50. Load Wheel Kits include two load wheel assemblies made of ultra-poly materials, bearings, axles, and fasteners for Manual Pallet Jack Crown PTH 50.
Before replacing load rollers with any load wheel kits on manual pallet jack crown PTH 50, you need to conduct an inspection on both load roller and load roller brackets. To inspect Load Roller (load wheel kits) & Load Roller Bracket on Manual Pallet Jack Crown PTH 50:
-
Load rollers
should have flat spots or large pieces of metal embedded (tacks, nails, or metal shavings). Note that any chips in the wheel can keep it from rolling smoothly and indicates it needs replacement.
- Inspecting the
load roller brackets
, you need to check for cracks, wear from prolonged use, and rub on the floor. Make sure to double-check for out-of-round axle holes and inspect the bushings as well. If you found an axle hole and damage on bushings, you need load roller bracket replacement right away for your manual pallet jack crown PTH 50.
Here's an easy step on how to remove your load roller (load wheel kits) and load roller brackets on manual pallet jack crown model PTH 50:
Pump the jack to expose the Manual Pallet jack Load Roller
Turn the Manual Pallet Jack Crown PTH 50 to the side.
It would be best to use the following tools: hammer and pin punch to remove roll pins in the load roller brackets.
Remove the axle with pin punch and remove the load roller.
Drive the roll pin to fastens the pivot axle to the frame into the axle.
Next, you need to remove the pivot axle just enough to drive the roll pin out of the axle and then move the pivot axle entirely out.
Pull the pushrod away from the manual pallet jack crown PTH 50 frame and pull the brackets off.
How to Install your load roller brackets on Manual Pallet Jack Crown PTH 50
:
To install the load roller brackets, you need to slide the bracket to the pushrod and insert the pivot axle through the frame, roller, and brackets.
Line up the roll pin hole to secure the pivot axle and frame it with a rolling pin.
Once done, you can install the load rollers by inserting the axle through the brackets and load roller.
Secure the load roller axle to the frames using two roll pins.
Not sure if this load wheel kit is the right product for your manual pallet jack crown PTH 50?
You may contact us for compatibility and product recommendations. We stock over 5 million handling parts materials, products, and more.
Our customer representatives are prompt and respond within 10-15 minutes from the time you send your inquiry. Our support team is available from Monday-Friday from 6 am to 3 pm PST time zone.
We offer wide selections and high-quality load wheel kits for manual pallet jack crown PTH 50; Check our eBay store and offer same-day shipping for orders before 2 pm PST or 5 pm EST on Monday to Friday. This kit is covered with 1 Year Warranty.
RETURN POLICY
Our goal is to make you 100% satisfied with all transactions and parts/product needs.
If you are not satisfied with our product or ordered an incorrect part, message us, and we will issue RMA within 12-24 hours.
Our returns are hassle-free and straightforward, and we do not charge a restocking fee.
If we send defective or incorrect parts, we take care of return shipping and provide a full refund.
If you ordered the wrong parts or products, then you pay return shipping and get a full refund on the product.
Do you need a correct replacement? Just let us know, and our parts specialists will help right away!
Parts returned to us need to be uninstalled and in the original box.
Same day shipping and tracking available within 12 to 48 hours.
We stock over 5 million material handling parts, just message us and we will get anything you need.